This European Standard has been prepared by Technical Committee CEN/TC 218/WG 1 "Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications" (secretariat: Germany). The responsible national mirror committee is Working Committee NA 104-02-01 AA "Schlauchleitungen" ("Hose assemblies") in the Tank Installations Standards Committee (NATank). This European Standard specifies the requirements and test methods for verification for hose assemblies with vapour recovery for delivery systems on petrol filling stations. The hose assemblies with vapour recovery for delivery systems on petrol filling stations need to be capable of withstanding anticipated mechanical, thermal and chemical stressing and be resistant to the combustible liquids used in these applications as well as their vapour and vapour air mixtures. It is imperative that the assemblies be constructed in such a way that actions during normal operation cannot give rise to dangerous electrostatic charges nor that there will be any reduction in the performance of the vapour recovery. The assemblies are intended for use at ambient temperatures between -30 °C and +55 °C for normal temperature class and -40 °C and +55 °C for low temperature class at a working pressure ≤ 16 bar. Hoses can be constructed from rubber or thermoplastic elastomer (TPE) and this document specifies the requirements for three types of hoses in two grades and two classes of hose assemblies for measured fuel dispensing systems, including oxygenated fuels (≤ 15 % oxygenated compounds) with internal vapour recovery tubing or hose.