Dokumente AWWA

This standard describes resilient-seated cast-iron eccentric plug valves, 3 in. (75mm) through 72 in. (1,800 mm) in diameter, with flanged, grooved, or mechanical-joint ends.

This standard describes sodium aluminate in both liquid and solid form for use in water supply service. Sodium aluminate according to this standard is a combination of sodium oxide and aluminum oxide with sufficient excess causticity for stabilization.

This standard covers purified aluminum sulfate in liquid, ground, or lump form, for use in water treatment.

This standard describes the design, construction, inspection, and testing of composite elevated tanks that use a welded steel tank for watertight containment and a single pedestal concrete support structure. Requirements for the steel tank, concrete support structure, foundation, and accessories are included.

This standard describes manganese greensand used in pressure and gravity filters to remove dissolved iron, manganese, radium, arsenic, and hydrogen sulfide for water supply service applications. It discusses the placement, handling, preparation, and regeneration of manganese greensand media. Although manganese greensand filters frequently employ gravel and anthracite filter materials, they have been omitted from this standard with reference to the document ANSI/AWWA B100, Standard for Granular Filter Material, which covers these materials in detail. Major revisions made to the standard in this edition include the following: the references in Sec. 2 were updated with current titles; and modifications were made to conform to AWWA standard wording.

This standard describes the material and application for shop- and field-applied, liquid-epoxy interior linings and exterior coatingscoatings and linings used in the water-supply industry for steel water pipelines installed underground or underwater, under normal construction conditions.

This standard describes 1/2-in. (13mm) through 6-in. (150mm) air-release valves and 1/2-in. (13-mm) through 20-in. (500-mm) air/vacuum and combination air valves having gray cast-iron or ductile-iron bodies and covers.

This standard describes the critical requirements for the effective operation and management of a reclaimed water program. Reclaimed water, for the purposes of this standard, is treated domestic wastewater that is at all times adequately and reliably treated to the level appropriate for the end use. This is the first edition; as such, there are no major revisions.

This standard defines the methods to be used in the structural design of buried prestressed concrete cylinder pipe (PCCP) under internal pressure. These methods are provided for the design of pipe subjected to the effects of working, transient, and field-test load and internal pressure combinations. The design procedures of this standard are applicable to lined-cylinder pipe (LCP) having inside diameters of 16 in. through 60 in. (410 mm through 1,520 mm) and to embedded-cylinder pipe (ECP) having inside diameters of 24 in. (610 mm) and larger. The design for longitudinal hydrostatic thrust restraint of prestressed concrete cylinder pipe is not addressed in this standard. See AWWA Manual M9, Concrete Pressure Pipe, for information on this topic.

This standard describes the manufacture of circumferentially prestressed concrete pressure pipe with a steel cylinder and wire reinforcement in diameter sizes 16 in. (410 mm) through 144 in. (3,660 mm) manufactured with a steel cylinder and wire reinforcement. Larger sizes have been manufactured based on the concepts presented in this standard. The standard describes two types of prestressed pipe: (1) lined-cylinder pipe with a core composed of a steel cylinder lined with concrete and subsequently wire-wrapped and coated with premixed cement mortar, and (2) embedded-cylinder pipe with a core composed of a steel cylinder encased in concrete and subsequently wire wrapped and coated with premixed cement mortar. The structural design of prestressed concrete pipe for internal pressure and external load is not presented in this standard but is the subject of ANSI/AWWA C304, Design of Prestressed Concrete Cylinder Pipe. ANSI/AWWA C301 also does not include requirements for handling, delivering, laying, field testing, or disinfecting disinfection of pipe. See AWWA Manual M9, Concrete Pressure Pipe, for this information, as well as certain supplementary design considerations related to thrust restraint, subaqueous installations, and installation in corrosive environments.